Since Microsoft released Windows for Workgroups, networking has become quite easy and very commonplace for most home computer users. Everything that is needed to set up a home network is built right into the computer’s operating system which was installed in the machine. All you have to do is turn it on and set it up. If you happen to have Windows 95/98 setting up a network is a snap!
A home network is, simply put, a made up of set of hardware and also a set of software that will allow computers to communicate with each other. A home network enable File sharing or using the same printer or other input and outputs instead of buying one for each available computer.
A home network functions in almost the exact same way as that used by a private businesses when a LAN or Local Area Network is created. Designations, or IP addresses, as well as some that are catchy phrases that humans will remember are called host names and they know who everyone is as well as where everything is. Let’s say that 10.1.1.5 or Computer Jack sends a file to 10.1.1.6 or Computer Jill. The hardware and software must cooperate with each other in order to know where and how to send the file from Jack to Jill.
This idea is much the same as that used by the post office. There is an address associated with each home. A letter that is sent from one home is routed to another by using that address. Putting the return address on the letter is very important so the person knows where to respond. Also, if the letter gets lost, it will be sent back to the return address. If there is no return address it just goes to the dead letter office. Home computer networks work in much the same way.
The routing data is also known as ‘an envelope’. This surrounds the data or the words on the letter. A home network comes in two main types: cabled and wireless. In a cabled network different wire bundles which are known as Ethernet cables with connectors on each end plug into either a network interface card, or NIC, in the printer, fax, computer or into a switch/router. Hubs or switches are simplified devices that allow physical connections between the components of a network.
A wireless network operates in much the same way. The main difference is that there is no need for cables. Small devices known as transceivers send and retrieve information by radio signals. Let’s say that you want two computers within a home network to both be able to print on the same printer. Where would you even start to do something like that? You can make this happen in two possible ways. In one set up, the printer is physically attached to one of the computers. The alternate set up connects the printer to the network and not to any individual computer;
With this first arrangement, the printer is called local, but shareable. It is possible to allow a remote computer to print to the locally attached device. Computer-Jack then just shares the printer by using software of the hosting system, Computer Jill. In most typical cases nowadays, the printer has its own NIC. It is then attached to a router or switch by way of Ethernet cables or a wireless transceiver. Then each computer on the network is able to ‘see’ the printer as a device that the computer can use.
Scanners, fax machines and other computers operate in pretty much the same way. Every device receives an address and a name. Software on the device allows it to be configured so that its function is accessible to multiple computers on the same network.
By: Joseph Nyamache
-
Tags: Catchy Phrases, Designations, Ethernet Cables, Home Computer Networks, Home Computer Users, Home Networking, Host Names, Ip Addresses, Lan, Local Area Network, Most Home Computer Users, Network Functions, Networking System, Operating System, Post Office, Private Businesses, Return Address, Setting Up A Network, Snap, Wire Bundles
-
The way that it used to be, is people generally had one computer in their home. Internet access was based on dial-up modems which were connected directly with a serial cable on the home computer. No Local Area Network was needed. With the advancement of technology and the wide spread adoption of high speed internet connectivity at homes, necessitates that home appliances should be networked to facilitate online access and to also communicate and share information between them.
What I mean when I say home appliances is home computers, next generation game consoles, printers, scanners, network attached storage, etc. All of these “Appliances” need to share information amongst themselves over a network, but also need to have high-speed access to the Internet. To achieve that, you will need to set-up a home network. With a home based network you are technically building a local area network, which can be wired or wireless, that networked devices communicate between inside the home, and also share the same internet connection.
The base of the home network is your broadband router. This is usually a device that lets you setup a wired or a wireless network. You can use Ethernet cables if you’re making a wired network, or use Wi-Fi for wireless. This integrated router provides also the Internet access connectivity.
Once you have your home network setup, you can connect your computers, laptops, Xbox 360, Playstation 3, servers, network storage boxes, etc. After you successfully connect all your devices to the router, you can share and distribute your files over the network, have LAN parties on game consoles, play online video games, and share pictures between computer.
By: Alex SmithTags: Alex Smith, Broadband Router, Dial Up Modems, Ethernet Cables, Generation Game, High Speed Access, High Speed Internet, High Speed Internet Connectivity, Home Appliances, Home Computers, Home Network Setup, Local Area Network, Network Attached Storage, Network Storage, Next Generation Game Consoles, Playstation 3, Servers Network, Spread Adoption, Storage Boxes, Wireless Home Networks
-
Way back most families only had one single computer, and no other high tech devices. World Wide Web access was based on dial-up modems which were connected directly with a serial cable on the home computer. No Local Area Network was needed. The advancement of technology and the acceptance of modern high speed broadband connectivity at homes, necessitates that home appliances should be networked to facilitate online access and to also communicate and share information between them.
What I mean by home appliances is computers, gaming consoles, wired or wireless printers, and data storage devices like NAS. All of those devices need to communicated between themselves over a LAN, but also need to have high-speed access to the Internet. To achieve that, you will need to set-up a home network. With a home based network you are technically building a local area network, which can be wired or wireless, that networked devices communicate between inside the home, and also share the same internet connection.
The device that control the home network is the router. This is usually a device that lets you setup a wired or a wireless network. You can use Ethernet cables if you’re making a wired network, or use Wi-Fi for wireless. This router shares the internet connection with your devices.
Once you have your network in place, you have limitless opportunities to attach whatever you need to your network. Things such as laptops, desktops, gaming consoles, servers, print servers, etc After you successfully connect all your devices to the router, you can share and distribute your files over the network, have LAN parties on game consoles, play online video games, and share pictures between computer.
By: Alex SmithTags: Alex Smith, Data Storage, Dial Up Modems, Ethernet Cables, Game Consoles, High Speed Access, Home Appliances, Home Computer, How To Setup A Home Network, Lan Parties, Limitless Opportunities, Local Area Network, Network Router, Print Servers, Serial Cable, Setup A Home Network, Single Computer, Speed Broadband, Storage Devices, Web Access
